Skip to main content
Figure 6 | Journal of Biological Engineering

Figure 6

From: Characterization of hydromechanical stress in aerated stirred tanks up to 40 m3 scale by measurement of maximum stable drop size

Figure 6

Maximum stable drop size as a function of maximum local energy dissipation rate ϵ max . ϵmax calculated from ϵØ with ϕ = ϵmaxØ based on the equation of McManamey [28] for non-aerated conditions. Dispersion of paraffin oil in 1 mM PO4-buffer at pH 7.3. Maximum stable drop size measured after 3 h agitation. Geometries for different reactor configurations according to Table 2. Code for different aeration rates: +-center: 0.1 vvm, full symbol: 0.4 vvm, open symbol: 0.7 vvm, x-center: 1.0 vvm.

Back to article page