Skip to main content

Table 4 Quality of the fit for all 8 reactor configurations

From: Characterization of hydromechanical stress in aerated stirred tanks up to 40 m3 scale by measurement of maximum stable drop size

Reactor configuration A-1 A-2 A-3 A-4 B-1 B-2 B-3 C-1
Standard deviation [%] 6.1 2.0 1.7 9.0 3.9 5.1 4.0 6.7
  1. Standard deviations of the relative difference between measured values for dmax and calculated values based on Eqs. 1 and 2 (values for ϕ see Table 5) were used as a measure for the quality of the fit.
Back to article page

Journal of Biological Engineering

ISSN: 1754-1611