Skip to main content

Table 1 Fitting parameters for the equations in Fig. 4

From: Polymer-based controlled-release fed-batch microtiter plate – diminishing the gap between early process development and production conditions

Fitting parameter Influence of osmotic concentration (Fig. 4A) Influence of pH (Fig. 4B) Influence of temperature (Fig. 4C) Influence of initial ammonia (Fig. 4D)
a −1.20 · 10− 4 (mg·L)/h/mOsmol 1.51 · 10− 1 mg/h 1.41 · 10+ 22 mg/h 6.30 · 10−3 (mg·L)/h/mmolNH4+
b 0.164 mg/h 4.22 1.41 · 10+ 8 2.07 · 10− 1 mg/h
c 5.44 7.38 · 10−2 mg/h
  1. The headlines of each column assign the fitting parameters (a, b and c) to the respective equation of Fig. 4. Inserted into the respective equation, the units of the fitting parameters result in the correct unit for a glucose release rate (mg/h)